ترموستات سرمایشی ریلی تابلویی KTS-011

معرفی

این ترموستات ریلی مدل KTS 011 جهت تنظیم دمای محیط به عنوان ترموستات فن مورد استفاده قرار میگیرد و دارای تک خروجی (تک کنتاکت) و قابلیت تنظیم درجه حرارت از 0 تا 60 درجه سانتیگراد می باشد.این ترموستات ها بر روی ریل 35 میلیمتری قابل نصب هستند و دارای کنتاکت باز (N.O) می باشد. 

مشخصات

ولتاژ کاری 220 ولت AC 
ظرفیت کنتاکت تا 10آمپر در 250 ولت AC
محدوده دمای قابل اندازه گیری از 0 تا 60 درجه سانتی گراد

introduction

The mechanical thermostat temperature controlling range is from 0℃ to 60℃, perfect for using to control heater.The adjustable button is for easy and convenient to adjust the controlling temperature.
When the room temperature is lower than the temperature set by the thermostat, the circuit closes and the equipment starts. When the room temperature is higher than the temperature set by the thermostat, the circuit is disconnected and the equipment stops. N.O : When the room temperature is lower than the temperature set by the thermostat, the circuit is disconnected and the equipment stops.
The bottom of mechanical temperature controller switch is with 2 wire interfaces,which can make wire connection become more sturdy and safer.
The back of heat control regulator is with fixed bracket,installation guide rail is easy to fix.Using standard guide rail clamp design,more convenient to disassemble.
The mechanical temperature control switch mainly use for controlling cooling applications ,like filter fan and other signal device. 

Specification

Small size 60 x 33 x 43 mm
Variable fitting position and simple to mount (clip for 35mm DIN rail)
Maximum switching capacity: 250Vac, 10(2)A; 120Vac 15(2)A; Vdc 30W
Switch temperature difference 7K (±4K)
Thermostatic bimetal sensor element
Contact resistance <10mΩ
Service life >100,000 cycles
EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection 2-pole terminal for 2.5mm2