شیلد آردوینو ماژول زیگبی XBee SainSmart ورژن V1.1
zoom_out_map
chevron_left chevron_right

شیلد آردوینو ماژول زیگبی XBee SainSmart ورژن V1.1

3400001050

شیلد آردوینو XBee pro ماژول زیگبی ZIGBEE جهت سهولت اضافه کردن قابلیت بی سیم 

1,070,000‎ریال (با مالیات) 1,070,000‎ریال (بدون مالیات)

معرفی

شیلد آردوینو زیگبی آردوینو یک راه بسیار آسان برای اضافه کردن قابلیت‌های بی سیم به پروژه‌ اینترنت اشیاء  IOT بر پایه برد آردوینو شما است. این سری شیلد به راحتی با تمام نسخه‌ها از جمله سری 1 و 2.5 و PRO کار میکند. شیلد زیگبی پرو ویژه برد های آردوینو می تواند به یک شبکه ZigBee دو پهلو ساده دسترسی پیدا کند و ارتباطات بی سیم بین آردوینو را برقرار کند و آنرا را قادر می سازد تا بصورت بی سیم با یک پروتکل ZigBee اصلاح شده با استفاده از ماژول محبوب XBee ارتباط برقرار کند.

ویژگی ها

  • مستقیماً روی آردوینو شما سوار می شود
  • پین های DIN و DOUT زیگبی می توانند به پایه های UART یا هر پایه دیجیتالی در آردوینو متصل شوند (به طور پیش فرض D2 و D3)
  • تنظیم توان 3.3 ولت و تغییر سطح MOSFET تعبیه شده
  • شبکه 9 در11  با سوراخ های  نمونه اولیه با فاصله 0.1 اینچ
  • نشانگر های LED: ، DIN ، DOUT ، RSSI و DIO5

Introduction

The SainSmart XBee board for Arduino mates directly with the Arduino USB board and allows to wireless communicate over a modified ZigBee protocol using the popular XBee module from Maxstream. This shield (an Expansion Board without XBee module) is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs. The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission. As the innovative design, XBee-PRO can be in the range 2-3 times beyond the standard ZigBee modules. XBee-PRO modules work in the ISM 2. 4 GHz frequency band. The MaxStream"s XBee (1 mW) Zigbee module is pin-compatible. You can use a simple AT command to advanced configuration. An OEM developer is now XBee code development package. It is self-developed in collaboration with the MaxStream ZigBee/802. 15. 4 RF module code. Features : Shield for the platform. Shield does not include an XBee module. Any XBee module will work with the shield. Board mates directly with the Arduino USB board and allows to wireless communicate over a modified ZigBee protocol using the popular XBee module from Maxstream. Compatibility : Xbee 1mw. Xbee Pro. Xbee 2. 5 series. Package Content : 1 x Xbee Shield.

Specification

3.3V and 5V dual power output
3.3V and 5V IO compatible
USB 2.0 protocol
BitBang mode ready
Easily connected to a PC via mini USB cable
XBee-setting support software X-CTU
Usage 1: PC via a USB cable directly connected with XBee adapters
Usage 2: Bluetooth Bee configure or use as a data-transmission
Uses 3: ARDUINO BOARD PRO MINI Downloader

امتیاز شما

    اولین نظر را ثبت کنید
ویرایش نظر
  یا لغو