ترموستات دیجیتال 12VDC مدل XH-W3002

Specification

Name: Microcomputer Temperature Controller
Model: XH-W3002
Temperature range: -50 ~ 110C
Temperature accuracy: ± 0.1C
Measuring accuracy: ± 0.2C
Input measurement: NTC 10 K L = 1 m waterproof probe
Power input: 12V
Output Power: 120W
Output Type: Direct Output
Output capacity: up to 10A
Installation height: Approx. 73mm/ 2.87inch (4mm opening)
ize: Approx. 61x 45x 31mm (2.4x 1.77x 1.22 inch)
Material: Plastic

Instructions

Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature) Temperature Control Range: -50 to 100 degree; Input: DC 12V; Output: 10A (MAX), input/output synchronization, can meet all kinds of large power load. LED Indicator Light: Display the current output status; Digital Display Tube: Shows measuring temperature, high accuracy of temperature measuring and controlling. Three buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time. Made of 1.8mm super-thick ABS material, high safety, ageing resistant, sturdy and durable.
888: Power on, press the UP and DOWN buttons at the same time more than 3 seconds, restore factory setting.
LLL: In use, means sensor is fault.
HHH: In use, means the temperature is above the range.
Press the setting buton, enter the internal menu. Press the up and down to switch setting parameter.
P0: Set Start temperature
P1: set stop temperature
P2: Set temperature calibration
detect temperature + corrected temperature = actual temperature
P3: Set delay start
Press the setting button, use the up or down button to set delay time( Minutes )