برد راه انداز ماژول رادار دوپلر مایکروویو HB100
zoom_out_map
chevron_left chevron_right

برد راه انداز ماژول رادار دوپلر مایکروویو HB100

3011007166

برد راه انداز ماژول HB100 کارکرد بر اساس سنجش خودکار اثر داپلر Doppler با حساسیت و پایداری بالا، زاویه دید وسیع و ولتاژ کاری مناسب 

4,168,000‎ریال (با مالیات) 4,168,000‎ریال (بدون مالیات)

معرفی

حسگر حرکتی میکرو ویو HB100 یک ماژول فرستنده-گیرنده دوپلر X-Band Bi-Static می باشد. در این حسگر، یک نوسان ساز تشدید کننده عایق(DRO) تعبیه شده است ، شامل یک جفت آنتن Microstrip patch می باشد ،عملکرد این ماژول به جهت استفاده در سیستم های تشخیص حرکت مناسب است ساده می باشد بدین ترتیب که ابتدا امواج میکروویو را ارسال نموده و سپس تفاوت بین فرکانس موج فرستاده شده را با فرکانس موج دریافت شده را اندازه گیری می کند. این اختلاف فرکانس، با سرعت حرکت جسمی که تشخیص داده است، نسبت مستقیم دارد.

از این ماژول می توانید جهت ساخت سیستم های هشدار، آشکارسازهای حرکت، کنترل روشنایی، اندازه گیری سرعت خودرو و درب های اتوماتیک، استفاده نمایید.

عملکرد سنسورهای مایکروویو به این صورت است که امواج الکترومغناطیسی با طول موج 24 گیگاهرتز توسط آنتن های موجود در داخل این سنسور ها در محیط منتشر شده و بازخورد آن توسط آنتن های گیرنده به پردازنده مرکزی ارسال میگردند. در صورتی که هیچ حرکتی در محیط نباشد فرکانس ارسالی و دریافتی برابر خواهد بود ولی چنانچه حرکتی صورت پذیرد فرکانس دریافتی تغییر کرده و پردازنده فرمان لازم را به رله خروجی ارسال می نماید.

Introduction

The microwave motion sensor is a microwave moving object detector designed using Doppler radar principle. Unlike ordinary infrared detectors, microwave sensors detect the motion of an object by detecting microwaves reflected from the object. The detection object will not be limited to the human body, and there are many other things. The microwave sensor is not affected by the ambient temperature, has a long detection range and high sensitivity, and is widely used in industrial, transportation and civil devices such as vehicle speed, automatic doors, sensor lights, and parking sensors.
Because of the universality of microwave sensor detection objects, in actual life applications, it will be matched with another sensor for targeted detection. Such as microwave sensor + infrared pyroelectric sensor, can effectively determine whether someone passed, will not be the sun, was disturbed by the color of clothing, will not respond to other objects.

Specification

Working voltage : 5V±0.25V
Operating Current (CW): 50mA max., 30mA typical
size: R=30.6mm
Emission parameters:
Detection distance: Used with adapter plate or reference circuit below, 2-16m continuously adjustable (minimum 2m, maximum 16m)
Helium emission frequency : 10.525 GHz
Frequency setting accuracy : 3MHz
Output power (minimum): 13dBm EIRP
harmonic emission: <-10dBm
Average current (5%DC) : 2mA typ.
Pulse width (Min.): 5uSec
Duty cycle (Min.): 1%
Receive parameters:
Sensitivity (10dB S/N ratio) 3Hz to 80Hz
Bandwidth: -86dBm10.3Hz to 80Hz Bandwidth Clutter 10uV
Antenna gain: 8dBi
Vertical 3dB beam width: 36 degrees
Water level 3dB Beam width: 72 degrees

Features

This detection method has the following advantages over other detection methods:
1. non-contact detection;
2. not affected by temperature, humidity, noise, airflow, dust, light, etc., suitable for harsh environments;
3. anti-radio frequency interference ability;
4.the output power is small, do not harm the body structure;
5. detection distance;
6. Support the detection of non-life objects
7. the direction of the microwave is very good, the speed is equal to the speed of light


      


امتیاز شما

    اولین نظر را ثبت کنید
ویرایش نظر
  یا لغو