سشوار صنعتی حرارتی آنالوگ 2000W مارک VOLT مدل VL-170
zoom_out_map
chevron_left chevron_right

سشوار صنعتی حرارتی آنالوگ 2000W مارک VOLT مدل VL-170

3301001484

سشوار صنعتی حرارتی آنالوگ 2000 وات مناسب برای کارهایی نظیر حالت دادن به لوله های پلاستیکی ، وارنیش ها ، بلند کردن برخی رنگ ها و پوشش ها

0‎ریال (با مالیات) 0‎ریال (بدون مالیات)
اتمام موجودی

معرفی

این سشوار جهت کارهایی نظیر حالت دادن به لوله های پلاستیکی ، وارنیش ها ، بلند کردن برخی رنگ ها و پوشش ها و ... کاربرد دارد .

مشخصات

- دارای یک سری فلزی به جهت افزایش تراکم هوای خروجی
- قابلیت تنظیم دما توسط ولوم قرار گرفته در پشت دسته
- تنظیم فشار هوای خروجی توسط کلید در دو حالت حداقل و حداکثر
- حداکثر توان ورودی 2000 وات
- حداقل دمای خروجی در حدود 50 درجه سانتی گراد
- حداکثر دمای خروجی در حدود 550 درجه سانتی گراد

Specification

1. Blowing PVC plastic pipe is bent and shaped.
2, hot or cold wind blowing paint or decoration cleaning.
3. Self-adhesive stickers and cleaning of decorations.
4. Untie rust or tight nuts and wires.
5. Dissolve the thawed delivery tube, thawed door lock or padlock.
6, soft goods welding objects.
7. Shrinkable PVC film as a protective layer for the package.

Disable instructions for use

1, can not be used as a hair dryer for hairdressing.
2, can not directly face or animal fur
3. Do not use in flammable or flammable gas.
4. Do not block or cover the air inlet or the air outlet.
5. When you have just finished using it, please be careful not to touch the nozzle, the handle must be kept dry.
6, to be completely cooled before storing
Applicable temperature recommendations:
Low temperature: 50 degrees -150 degrees thawed cryotube
205 degrees - 230 degrees plastic tube bending or softening dry paint or grinding
230-290 degree softening adhesive
425 degrees - 455 degrees softened solder
480 degrees -510 degrees loose rusted screws
High temperature: 520 degrees -550 degrees to clean the paint

امتیاز شما

    اولین نظر را ثبت کنید
ویرایش نظر
  یا لغو