ماژول کیبورد تاچ خازنی با MPR121
zoom_out_map
chevron_left chevron_right

ماژول کیبورد تاچ خازنی با MPR121

2181008018
1,064,000‎ریال (با مالیات) 1,064,000‎ریال (بدون مالیات)

در این برد از تراشه MPR121 استفاده شده که یک سنسور کنترل صفحات لمسی خازنی می باشد و از پروتکل I2C برای برقراری ارتباط استفاده می کند.

Description: The MPR121 capacitive keypad uses the MPR121 and 12 touch sensitive pads to give you a simple ‘keypad’ with an I2C output. These keypads function by measuring the capacitance of twelve electrode points. When an object comes close to the electrode connector, the measured capacitance changes. This signals the MPR121 that something has touched a ‘button’.

The board also has four mounting holes allowing it to be used as an input system in place of traditional buttons. This keypad outputs 3.3V logic. If you are using a board which only accepts 5V logic, you will run into a problem. You will want to use a logic level converter, or a board which accepts 3.3V logic.

Documents:
امتیاز شما

  • فرید تبریزی نژادیه | بیش از 6 سال قبل
    سلام. میشه لطفا ابعاد کلی و ابعاد کلید ها رو هم بگید؟
    پاسخ | گزارش
    0 thumb_down
    0 thumb_up
    • بخش فروش | بیش از 6 سال قبل
      ابعاد برد 79x48 میلی متر و ابعاد هر کلید 13x13 میلی متر میباشد
      پاسخ | گزارش
      0 thumb_down
      0 thumb_up
ویرایش نظر
  یا لغو