رابط افزایش طول شفت انعطاف پذیر دریل

معرفی

رابط افزایش طول شفت انعطاف پذیر دارای 100 سانتی‌متر طول می‌باشد و جنس آن از فلز با روکش فایبرگلاس است. این رابط قابلیت چرخش و انعطاف 360 درجه را دارا می‌باشد و از این رو برای استفاده در هر زاویه‌ای مناسب می‌باشد. بسیار نرم بوده و دسترسی به نقاط سخت و غیر قابل نفوذ را سهل و آسان می‌کند. از دیگر ویژگی‌های مهم این رابط می‌توان به قابلیت اتصال آن به انواع دریل و پیچ‌گوشتی اشاره نمود.

Introduction

It is forbidden to bend at an acute angle and near a corner, as far as possible to bend naturally as far as possible, and the shaft of the soft shaft spring rubs the wall seriously, causing jitter and reducing the service life.
The small-angle caused by the spring deformation of the hand-held soft shaft naturally drooping body, if it has appeared, indicates that the soft shaft axial spring has been deformed, severely rubbing the pipe wall, causing jitter and reducing the service life.
Gold-tone aluminum alloy casing, high strength, and corrosion resistance.
High-temperature non-heating bearing, high precision. The chuck is not used during the process.
When inserting, the bump on the soft shaft is aligned with the inner of the tail of the hanging mill. After the right, the force is applied, the link is hoisted, the electric grinder, and the table grinder.
Replace the hose core; unscrew the inner screw with the hexagon socket and remove the entire shaft to replace it.

Specification

Type: Gold Drill Chuck
Material: Stainless steel
Size: 0.3-6.5mm
Clamping Range: 0.5-6.5mm
Body Material: Stainless steel
Shell Material: Aluminum alloy
Color: Gold
Flexible Shaft Length: 1000mm
Flexible Shaft Diameter: 9.4mm
Axis Length: 870mm
Axis Diameter: 6mm
Flexible Shaft Material: Rubber

Package Includes

1 x Electric Drill Chuck
1 x Flexible Shaft
1 x Chuck Wrench
1 x Small Hex Wrench