ماژول LED RGB خطی 8 تایی مدل k845041
zoom_out_map
chevron_left chevron_right

ماژول LED RGB خطی 8 تایی مدل k845041

3011007125
LED دیجیتال SMD مناسب جهت ساخت پرده LED، تابلو روان، تابلو LED با ولتاژ کاری 5 ولت و یک خط داده برای کنترل رنگ نور
تعداد تخفیف واحد قیمت کالا با تخفیف
20 3% 73,235‎تومان
755,000‎ریال (با مالیات) 755,000‎ریال (بدون مالیات)

معرفی

ماژول LED RGB تکی از سه رنگ قرمز، سبز و آبی تشکیل شده است. پایه دریافت اطلاعات به کنترلر وصل شده و افکت های رنگی را از آن دریافت و اجرا میکند. پایه خروجی این ال ای دی به ورودی بعدی وصل شده و افکت های LED بعدی را مشخص می کند. از این LED میتوان در ساخت کاردستی های LED، پرده های LED، نورپردازی تزئینی، تابلو های LED، ماکت و ... استفاده کرد.

مشخصات

ابعاد فیبر :  60X33 میلی متر
تعداد فیبر : 1 عدد
نوع ال ای دی : RGB
نوع فیبر : فایبر گلاس
تعداد پایه ها : 6 پایه
ولتاژ مورد نیاز : 5 ولت DC

Introduction

This is Full-Color LED Module / RGB V2 light water for Arduino.

D0-D7 This 8-pin respectively to control 8 LED, so long as the number corresponding with pin connected just fine (as long as we turn this experiment received 2 to 9 pin on OK). Also, next three pin RGB, the need connected with GND, connected with R on the bright red, bright green on connecting with the G, B is connected with the bright blue, while even up on all three lights.

As same as the digital handset control mode, a little selection of control corresponds to LED lighting, the color selection control segment through various procedures can produce a variety of color effect changes.

Specification

Good PRINT PACK design, very beautiful.

8 world of the three primary colors (red-green-blue) LED color, scanning control mode.

Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.

امتیاز شما

    اولین نظر را ثبت کنید
ویرایش نظر
  یا لغو