میکروکنترلر GD32F103RET6
zoom_out_map
chevron_left chevron_right

میکروکنترلر GD32F103RET6

میکروکنترلر ARM Cortex M3 با حافظه 512KB و فرکانس کاری Up to 108MHz ساخت شرکت GD

3,500,000‎ریال (با مالیات) 3,500,000‎ریال (بدون مالیات)

.است STM32F103RET6 امکانات میکروکنترلر و پایه ها دقیقا مشابه

لازم به ذکر است که میکروکنترلر از نظر کارایی بانسخه شرکت STM هیچ تفاوتی نداشته و تمامی کامپایلرها و برنامه های نسخه STM بر روی این میکروکنترلر نیز قابل اجرا می باشد.

Introduction

GD32® is a new 32-bit high performance, low power consumption universal microcontroller family powered by the ARM® Cortex®-M3 RISC core, which targeted at various MCU application areas. GD32® family integrates features to simplify system design and provide customers wide range of comprehensive and superior cost effective MCU portfolios with proven technology and great innovation. Building on GigaDevice advanced patented "gFlash" memory technology and mass production experiences, it provides new form of MCUs which offers customer high functionality and quality. GD32® family includes entry line, performance line and connectivity line currently.

GD32® MCU incorporates the 32-bit ARM® Cortex®-M3 processor core operating at 108 MHz max frequency with Flash accesses zero wait states to obtain maximum efficiency. It provides up to 3024 KB on-chip Flash memory and up to 96 KB SRAM memory. An extensive range of enhanced I/Os and peripherals connected to two APB buses.  The device offers up to three 12-bit 1MSPS ADCs, up to ten general-purpose 16-bit timers plus one PWM advanced timer, as well as standard and advanced communication interfaces: up to three SPIs, two I2Cs, five USARTs, an USB 2.0 OTG FS and two CANs. The device operates from a 2.6 to 3.6 V power supply and available in -40 to +85°C temperature range. Three power saving modes provides the flexibility for maximum optimization between wakeup latency and power consumption, an especially important consideration in low power applications.

GD32® series MCUs also bring much advantage to the end-user. The max speed of GD32® MCU has increased 50% than the market competing products. Code execution efficiency of the same frequency has enhanced 30%-40%. Current consumption of the same frequency has reduced 20%-30%. These performances provide maximum capability and bandwidth options for various market requirements.

The above features make the GD32® MCUs suitable for a wide range of applications. It is ideal for use in industrial control, user interface, motor drives, power monitor and alarm systems, consumer and handheld equipment, solar photovoltaic control, touch panel, PC peripherals and so on


Specification

Speed and Memory
Maximum Speed Up to 108MHz
Flash Memory 512K
RAM 64K
PSRAM -

Connectivity  
USART 5x
I2C 2x
SPI 3x
CAN 1x
I2S 2x
SDIO 1x

Analog Interface
12bit ADC 3 Units
12bit ADC 16 Channels
12bit DAC 2 Units

Packages  LQFP64

2091003053

نظرات (1)

امتیاز شما
  • حامد تاران • ارسال شد
    این میکروکنترلر رو میشه مشابه نوع اصلی باهاش کار کرد؟ یعنی با نرم افزار کیوب براش کد تولید کنیم؟ رجیسترها همان هستند؟ لطفا راهنمایی کنید

    ______________________________
    پاسخ: سلام، بله دقیقا مشابه نمونه اصلی بوده و هیچ تفاوتی ندارد
نظر جدید
نظر شما ثبت شد و پس از بررسی نمایش داده خواهد شد.

گزارش نظر
Thank you for reporting.

گزارش نظر
نظرات غیر منطقی را گزارش دهید!
* فیلد های الزامی
  یا لغو
ویرایش نظر