برد توسعه ESP32-S3 دارای Wifi و بلوتوث با تراشه CP2102

Introduction

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8 MB PSRAM.
At the core of the modules is an ESP32-S3 series of SoC, an Xtensa (R) 32-bit LX7 CPU that operates at up to 240 MHz. You can power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32-S3 integrates a rich set of peripherals including SPI, LCD, Camera interface, UART, I2C, I2S, remote control, pulse counter, LED PWM, USB Serial/JTAG controller, MCPWM, SDIO host, GDMA, TWAI(R) controller (compatible with ISO 11898-1), ADC, touch sensor, temperature sensor, timers, and watchdogs, as well as up to 45 GPIOs. It also includes a full-speed USB 1.1 On-The-Go (OTG) interface to enable USB communication

Specification

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + BLE MCU module that integrates complete Wi-Fi+BT+BLE functions.
ESP32-S3-WROOM-1 have a rich set of peripherals. They provide acceleration for neural network computing and signal processing workloads.
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard.
Wi-Fi (2.4 GHz band),BT+BLE,Dual high performance Xtensa 32-bit LX7 CPU cores.
SP32-S3-WROOM-1 comes with a PCB antenna, 8 MB Flash and 8MB PSRAM.Three mutually exclusive ways to provide power to the board.